潮州附近有没有服务

One stop service provider for production, installation and commissioning of sandblasting room

Sandblasting room | sandblasting machine | mechanical recovery automatic sandblasting room source strength manufacturers

Your location: homepage > common problem >

National Service Hotline

thirteen billion four hundred and seventy-five million eight hundred and twenty thousand nine hundred and twenty-nine

How to design small sandblasting room

Author: admin Source: This station Time: 11:13, January 12, 2016
Small sandblasting room and spray painting room refer to the sandblasting room and spray painting room built in the production workshop (commonly known as room structure). It is a kind of design scheme to deal with small and medium-sized equipment in small steel structure, container, construction machinery, power generation equipment and other industries. In the actual process design, it is also possible to design the assembly line. The general size is: width is 3-8m, length is 6-30m, height is 3-8m, and the structure is generally steel structure.
 Small sandblasting room
1、 Design principles
The design of "taobo" sandblasting room and painting room should not only reflect the development level of contemporary painting, but also take practicality as the principle, and take the lowest investment, the lowest operation cost, the least maintenance probability and the simplest operation mode as the design objectives.
1.11.1. Advancement
The system design and equipment matching should reflect the requirements of modern production. The advanced technology and design shall be adopted as far as possible under the premise of funds. The advancedness is mainly reflected in high efficiency, convenient control, large amount of dust treatment and less dust emission. The electrical control system implements centralized control of control cabinet, separate control of equipment, display of working state, display of safety alarm, etc.
2 2 2, 2 2, practicality
The design of "taobo" sandblasting room and spray painting room should first consider its practicability, which is mainly reflected in its convenient and reliable use, low failure rate, simple and convenient maintenance and convenient replacement of parts and components.
Environmental protection
"Taobo" sandblasting room and spray painting room system will produce a lot of dust, paint mist and solvent. In the design, it is necessary to prevent the dust, paint mist and solvent leakage in the painting room, especially the sealing of the door; the concentration of dust, paint mist and solvent inside the painting room should be reduced as much as possible; the emission of processing dust, paint mist and solvent should be reduced as much as possible; the breathing air of sandblasting workers should be controlled by Special treatment of special air supply. In addition, take measures to reduce the noise.
Security
Due to the bad working environment of sandblasting room and spray painting room, the workers are in a closed environment, and the painting operation has certain dangers. Therefore, the design of coating system, the layout of internal structure of the room, the maintenance and repair of carrier mechanism, and the design and layout of electrical system should be considered from the perspective of safety. The following national codes shall be strictly followed in the design: GB 7692 safety regulations for painting pretreatment process safety; GB 7693 safety regulations for painting pretreatment process ventilation and purification; and GB 16297
Comprehensive emission of air pollution of the people's Republic of China.

Next: no more