潮州附近有没有服务

One station sandblasting manufacturer installation service

Sandblasting room | sandblasting machine | mechanical recovery automatic sandblasting room source strength manufacturers

National Service Hotline

thirteen billion four hundred and seventy-five million eight hundred and twenty thousand nine hundred and twenty-nine

Mechanical recovery sandblasting room

Author: admin Source: This station Time: 10:29, April 20, 2019

Product Description:
Recycling method:
1. Belt conveyor + bucket elevator + separator 2. Scraper + BELT + bucket elevator + separator 3. Screw conveyor + bucket elevator + separator

System features:
1. The system uses mechanical power to recover abrasives. Sandblasting Abrasives can be selected at will. The abrasives are recycled and the machining efficiency is high;
2. This machine adopts two-stage dust removal, and its total dust removal efficiency can reach more than 99.99%;
3. The system air volume adjustable device is added to the machine to balance the recovered sand material from entering the filter element dust collector, so as to reduce the sand material loss and achieve the best dust removal effect;
4. The main electrical components are imported products with stable performance, safety and reliability, long service life and simple maintenance;
5. "Sound and light alarm system" is equipped in the upper part of the front roof of the sandblasting room, and an emergency stop call button is provided in the sandblasting room;
6. When one of the systems fails, the relevant systems will stop working and the spray gun will stop spraying.
Fully automatic mechanical conveying and recycling sandblasting room / shot peening room system
        A complete set of sandblasting room / shot peening room system consists of sandblasting / shot peening room body, air source system, sand blasting / shot blasting system, abrasive recovery and separation system, ventilation and dust removal system, workpiece conveying system, labor protection system, lighting system and electrical automation control system; sandblasting room / shot blasting room is mainly used for construction machinery, bridge steel structure, heavy machinery, containers, rolling stock, etc Surface sandblasting and shot peening in aerospace, petroleum and petrochemical, electric power, weapons and other industries. The company adopts advanced module design, factory prefabrication and on-site assembly; the structure is reasonable and beautiful, and the design and manufacturing cycle can be controlled within 1-3 months.
In the fully automatic mechanical conveying and recycling sandblasting room / shot blasting room, the method of mechanical conveying and recycling abrasives is adopted, which has changed the pneumatic conveying and recycling method which has been used from 1980s to 1990s. The method of mechanical transportation recovery is more efficient, more environmental protection and lower cost. The efficiency of this method is 20 times higher than that of the same type of pneumatic conveying method, and the energy saving is 80%.
Sand blasting room / shot peening room process: workpiece in → sand blasting / shot → recovery → screening → dust removal → workpiece out, the process can be automatically controlled.

Schematic diagram of sandblasting / shot room results:
1. Chamber dust collector
2. Separation dust collector
3. Sand (shot) hopper
4. Bucket elevator
5. Primary separator
6. ACM sandblasting machine
7. Belt conveyor
8. Dust suction port
9. Honeycomb floor hopper
10. Large fan
11. Muffler
12. Air inlet
13. Ground rail trolley
14. Secondary separation


Next: no more